VCarve Desktop Post Processor

Home User Forum General Inquiries VCarve Desktop Post Processor

This topic contains 0 replies, has 1 voice, and was last updated by  Jeremy Stevenson (Iconic Inc.) 10 months ago.

  • Author
    Posts
  • #1166

    Good Day Everyone,

    As you may have heard, ICONIC has recently introduced VCarve Desktop as a software option. The current iteration of VCarve does not have our post processor installed (the next update will come with it pre-installed), so you will need to manually install it.

    To install the post processor, simply download the file below onto your Desktop, and Copy (Ctrl + C) it. Then, open VCarve Desktop and select File > Open Application Data Folder, double-click the PostP folder and Paste (Ctrl + V) the file into that directory. Finally, shut down VCarve, re-open the software and the new post processor should appear in the post processor directory for your use.

    Click To Download

    Although the post processor is METRIC, you can still design your project in inches, and even have your machine display in inches. The machine will make the calculations and adjustments itself. If you have any questions at all, please let us know!

You must be logged in to reply to this topic.